This is an old revision of the document!
Jessie
Model : Prusa CoreONE
Status : Active
Build date : July 6th 2025
Filament info
Prusament PLA
Prints matte around 200°C and shiny around 220 - 230°C.
Use a 0.025mm clearance for a snug fit.
3d-print:jessie
This is an old revision of the document!
Model : Prusa CoreONE
Status : Active
Build date : July 6th 2025
Prints matte around 200°C and shiny around 220 - 230°C.
Use a 0.025mm clearance for a snug fit.