3D Modeling

This section will document what I wish to keep handy regarding Blender 3D, an advanced and powerful 3D modeling suite. It's free and open source so feel free to rush to their website, download it, and have fun as well.

Before starting a composition it is good practice to have some reference images and a rough sketch of where you want the final composition to go in terms of disposition and arrangement.

Start by boxing out the different elements with rough primitive shapes until you have your entire composition boxed out.

Then take each element into finer stages of detail step by step, don't try to model the elements from box to final in one go.

Use loop cuts to add mesh (CTRL + R) but be wary of adding too much to stay in the low poly. Move individual vertices around a little randomly.

Make good use of the Mirror Modifier and Solidify Modifiers to speed up workflow on basic shapes and apply them only when you want to break the symmetry and add finer details (destructive modeling). Scale can be applied on shapes (CTRL + A) but it is not mandatory and modeling can be done with scales other than (1,1,1).

Beams are useful elements on buildings to join parts together and hide overlaps.

Cut out windows and doors using the knife (K) tool in the base object. Then select the edges, duplicate and move them outwards, scale them down a bit, separate to make a new object, in that new object in edit mode extrude outwards and then add a solidify modifier. Careful that your normals face the right way. If you have mirrors not applied be sure to activate clipping so that the points on the mirror axes don't separate from each others when scaling down.

It's handy to start with a boxed shape then inset faces and extrude them and scale them down along the normal to get quick good looking volumes.

Trees and landscapes can be sculpted with a finer mesh and then decimated using a modifier to bring them back down to Low Poly.

Solidify + Decimate work well together to give jaggedy looks to objects and land parts.

Make good use of the proportional editing (O) tool.

Good practice : Duplicate elements using Shift + D and then detach using P. (e.g. to detach a roof off a roughly boxed building) Duplicate face loops and extrude along the normals towards the outside (e.g. to create pipe joints)

Careful : Rotations in edit mode do not apply a transformation relative to global axes. It's better to rotate in object mode so the local axes are preserved.

Once shapes have been modeled out, it can be handy to scale by the normals using ALT + S

N-gones are OK to model with as long as they are kept on a same surface. It is safer though to tidy things up with the knife tool to create quads and triangles. Blender converts everything to triangles to render anyways so tidying things up brings you closer to what Blender is actually seeing in your mesh.

If your mesh is chiseled looking and shaded differently because the quads and triangles are not on the same plane you can flatten things out by selecting all the concerned faces and scaling them to 0 along the proper axis.

Useful tip : when using knife tool E starts a new cut elsewhere.

Careful when using mirror modifiers, if you move in object mode it moves both sides in the same direction along the given axis because it moves the object center around which the mirror is calculated. If you move in edit mode it moves the selection relative to the given axis effectively copying the move on the mirrored side.

When using shapes to cut out mesh in other shapes using the Boolean modifier it is handy to switch the viewport display of the shape being used for the cut into wireframe to see things better. This is done in the Object properties under Viewport Display tab. Don't forget to also toggle it off of the Render in that case.

Don't forget to organize your scene into collections that are easy to manage. Unless you are in a workflow where other people will also work on your models in fine detail it is generally a big waste of time to rename each mesh object in your scene. Collections are there to organize your scene into meaningful elements that you can quickly hide/reveal and or select.

Great places to look for textures :

• PolyHaven

• Free PBR

For all the texture nodes use a Texture coordinate node (use output Object) and a Mapping node (use input Vector). Hook the output Vector of the Mapping into the input Vectors of the each texture images.

If you have Node Wrangler add-on activated, the keyboard shortcut CTRL + T will automatically generate these nodes.

Incidently, using Node Wrangler add-on you can select the Principled BSDF and use CTRL + SHIFT + T to open a bundle of maps and have them set-up as a Principled Texture.

Keep the diffuse image in sRGB colorspace but if your mapping on an object use a Box projection instead of Flat.

For roughness use Non-Color colorspace and Box projection as well.

For the normals use Non-Color colorspace and Box projection. Use a Normal map node to convert the output Color to the input Normal of the Principled BSDF

The displacement avoids the Principled BSDF and goes directly into the Displacement input of the Material Output. This is because the displacement actually affects the geometry of the object whereas the Principled BSDF affects the way it looks.

Displacement must be activated in the Options under the Surface tab (choose : Displacement and Bump instead of Bump Only)

Displacement works best when there are many polygons on the object (use of a Subdivision Surface modifier is advised) and adds a good bit of detail. The drawback is it takes a lot more processing power and it's use is not advised for games.

In the case of texture painting, there is a way to add a bit of normals and bumpiness using the data from the image texture and a few color ramps as so :

A texture atlas is a custom image combining many different textures all in one image. It has the huge advantage of asking the CPU/GPU to load only one image and pick all the textures for different objects from parts of that image. The inconvenience is that each texture will have a lower pixel resolution (being part of a greater image)

Using seamless textures is useful as the texture will repeat itself when scaled without it being too noticeable at a glance. However, if you scale too much, a pattern will become visible as the texture repeats itself.

There are two ways to scale :

In the node editor, on the mapping node :

In the UV editor, by scaling the unwrap. This second option is preferable if you are going to export your scene to a game engine as the UV unwrap (and it's scale) will be exported with it.

A handy feature of seamless textures is that they will continue applying if you modify your geometry. One good way to do this is with an edge slide (Shortcut : G + G). If you want to edge slide beyond the existing geometry you need to remove clamping (Shortcut : C while edge-sliding).

Procedural textures are created by using nodes instead of images or photographs to create a material. Basic texture nodes are mixed together (often with a MixRGB node) and the Color output is then used to give both roughness and normals to the material.

When creating textures with this method it's important to think macro-details and micro-details and mix them together. The Scale value of the basic texture nodes can be used to this effect.

A rapid shortcut to create a mix node is to CTRL + SHIFT + RIGHT-CLICK & DRAG from one node to the other one that you want to mix.

The procedural textures can be very easily tweaked and modified. They do not require much artistic skills as opposed to the creation of textures based on images and photographs (although those are often available for free or a small fee on many platforms online). One downside however is that these textures need to be baked to be exported to a game engine, although that is a minor downside as baking is often required when exporting to game engines anyways.

Start by remeshing : SHIFT + R to choose voxel size then CTRL + R to remesh.

A handy shortcut to toggle selection between objects in Sculpt Mode is to hover over the object you want to select and then ALT + Q

A good figure to start sculpting is anywhere in the tens of thousands of faces for small features and hundreds of thousands for large features. For very detailed sculpting, modelers often go into the tens of millions of faces but this does require an adequate machine (High end CPU & GPU and 64 to 128 GB of RAM).

Appending a file to another allows you to bring in any collections from the original file you want to import from. The collection is brought with all it's objects and is more editable.

Linking on the other hand imports a collection as a single object. Note that the origin point for that object will be the world origin from the original file, so if the collections are not centered on that world origin it will be offset when you link it. Also note that the link is not dynamic so any change made to the object in the original file will not update in the other project until the first one is linked again.

These are a few 3D models I made following various tutorials to learn Blender.

• Uses a bend modifier to create a circle with basic shapes.
• Uses a nice simple low poly esthetic with bevels and moving a few vertices around
• Shows the use of a lattice to parent an object or group of object to follow modifications made to the lattice (bends and such)

Video Tutorial

• Use basic extrude (CTRL + Right Click) in Edit Mode to quickly get trunk and branches
• Use the 'image as plains' addon to create a branch from an image with a transparent background
• Add a particle system to multiply that branch using vertex group to focus it only on the branch and not on trunk + with a lot of random scale/rotate it gives a realistic impression
• Texture the bark of the tree

Video Tutorial

• Use the cell fracture add-on
• Basic particle system use and how collections work instead of layers with that add-on
• Use basic mix shader materials with voronoi displacements
• Use compositing node with backdrop to use a render image as a ghost to draw gas around the planet

Video Tutorial

• Introduces the use of integrated cloth animation to render cloth materials (let it drop and choose the keyframe where you find it to your liking)
• Also uses basic glass materials and basic lighting

Video Tutorial

Video tutorial

• H / ALT + H : Hide / Unhide objects in object mode
• ALT + S : Scale along normals in Edit mode
• SHIFT + N : Rcalculate Normals
• O : Toggle proportional Editing ON/OFF
• CTRL + A : Apply menu to apply scales, rotations, etc.

• CTRL + Right Click & Drag : Lasso select (according to object centers) in Layout Mode
• CTRL +/- : Select more / less of mesh (based on a first selection of faces or edges or vertices

• SHIFT + R : See & Change Voxel Size of Remesh
• CTRL + R : Apply Remesh