Differences

This shows you the differences between two versions of the page.

--- 3d-print:jessie [2025/07/06 19:20] – mh
+++ 3d-print:jessie [2025/07/12 16:11] (current) – [Prusament PLA] mh
@@ Line 7: / Line 7: @@
 Build date : July 6th 2025
-[[https://help.prusa3d.com/product/core-one|Prusa Official CoreONE Page]]
+===== Filament info =====
+=== Prusament PLA ===
+  * **matte** around 200°C and **shiny** around 220 - 230°C.
+  * Use a 0.025mm clearance for a **snug fit**.
+===== Maintenance =====
+  * **[[https://help.prusa3d.com/product/core-one|Prusa Official CoreONE Page]]**
+  * **[[https://help.prusa3d.com/article/adjusting-belt-tension-core-one_845048|Belt tensioning Guide]]**
+  * **[[https://help.prusa3d.com/guide/buddy3d-camera-for-core-one-installation_405529|Budy 3D Camera Installation]]**
+  * **[[https://help.prusa3d.com/guide/how-to-install-advanced-filtration-core-one_868297|Advanced Filtration System Installation]]**
+  * **[[https://help.prusa3d.com/article/lcd-menu-core-one_829752|LCD Menu structure]]**