====== I2C OLED 0.91 inch Screen ======

Exists in various format (128x32, 128x64)

{{composants:0.91lcd.jpg?300}}

===== Specifications =====

  *5V ready
  *Can use I2C (two wires) or SPI communication

===== Usage =====

You can use **Adafruit SSD1306**.

The 128x32 uses address 0x3C

If you are connecting to SDA/SCL using I2C connect pin SDA to UNO A4 and SCL to UNO A5 (default pins, respectively 20 and 21 on a Mega)


++++ Basic Arduino text example |

<code c>
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
#define OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3C for 128x32
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }
}


void loop() {
  writeText();
}

void writeText(void) {
  display.clearDisplay();
  display.setTextSize(1);             // Normal 1:1 pixel scale
  display.setTextColor(WHITE);        // Draw white text
  display.setCursor(0, 0);            // Start at top-left corner
  display.println(F("Hello, world!"));
  display.display();
}

</code>
++++
===== Ressources =====

Bought from MakerHawk in chine.

  *[[https://projetsdiy.fr/ssd1306-mini-ecran-oled-i2c-128x64-arduino/|DIY Project for SSD1306 OLED I2C]]